CHEMET offers a steady supply of mass-produced aboveground tanks for propane and propane-butane gases in four basic capacities: 2700 l, 4850 l, 6400 l and 9200 l.

The tanks are manufactured according to the Pressure European Directive (PED) and have the CE-mark for the IV climatic zone and are adapted to the following operational parameters – temperature -20/+40°C and maximum pressure of 15.6 bar. In order to meet the requirements from the overseas standards CHEMET introduced in 2010 and 2011 a new line of LPG tanks on 1000 mm and 1250 mm diameters which operate in the full temperature from -40°C up to +50°C with maximum working pressure of 20 bar.


Standard LPG tanks manufactured by CHEMET are used primarily as an element of heating installations in residential single- and multifamily buildings, hotel and leisure centres, office and industrial buildings. The tanks are also extensively used in all kinds of plants, where gas is used for technological purposes such as poultry farms, drying houses for agricultural products and production facilities. Very important destinations for LPG tanks manufactured by CHEMET are so-called autogas stations.


The basic construction of tanks is in accordance with Directive PED 2014/68/UE and harmonized standards. Tanks are made of carbon steel plates, coated with high quality ternary paint coating in white colour, which at the same time, through high reflectivity, protects the tank from overheating. Paint coating is covered by quality and durability warranty.


Standard aboveground LPG tanks are equipped with the following fittings:

  • REGO filling valve – 1 ¾ ACME connection to the road tanker,
  • intake valve of the gas phase with pressure gauge and overflow pipe – connection for the 1 grade regulator, POL internal thread,
  • service valve / emergency emptying of the REGO tank – PT ”NPT connection to the road tanker,
  • Rochester fill indicator
  • safety valve (s) with shut-off valve by REGO or GOK.

You can also choose additional options, such as:

  • liquid phase intake valve,
  • liquid phase return valve,
  • electronic connection and probe for measuring the filling level and temperature,
  • additional connections for technological purposes,
  • other connections to be agreed and according to customer needs.

All fittings have a CE mark. The fittings are protected on the tank with a plastic cap.

We offer you a purchase of additional items along with aboveground LPG tanks:

I and II grade regulators of standard parameters for use in heating installations of residential buildings (yield 12 kg/h; output pressure);

CHEMET”s offer also includes aboveground tanks for other climatic zones and operating conditions from -40 to +50°C and operating pressures to 20 bar.

Catalog cards for LPG modules with above-ground and underground tanks

Technical data to download for above-ground tanks with a diameter of 1250 mm

Technical Data Sheet for above ground tanks with a diameter of 1250 mm

Guidelines for the foundation of LPG tanks

Technical data to download for above-ground tanks with a diameter of 1000 mm (max. Operating pressure 20 bar)

Technical Data Sheet for above ground tanks with a diameter of 1000 mm

Factory warehouses and recommended installation companies


Krystian Winszczyk

tel.: +48 32 39 33 192

kom.: +48 693 437 374

fax: +48 32 39 33 301